Serving Dallas–Fort Worth
Leak Detection & Repair in DFW
Water is sneaky. It shows up as a ceiling stain or a bill that makes you sit down, and the leak itself is usually somewhere else. We track it to the source first, then fix that spot.

- Price given before work starts
- Nothing starts until you approve it
- Repairs tested before we leave
- Work area left clean
The lowdown
A leak is rarely polite enough to drip where you can see it. Water runs along a pipe, a joist or the top of the slab until it finds a low point, so the wet patch on the drywall can be several feet from the fitting that let go. That is why we test before we cut. Guessing with a drywall saw gets expensive in a hurry.
The hunt starts at the water meter and works inward. With every faucet and appliance off, the meter shows whether the house is losing water at all. Then we close valves to split the plumbing into sections, hot side from cold and house from yard, until only one stretch of pipe is left to blame. Once we know where it is, you get the price, and the repair starts when you say so.
Clues that point to a hidden leak
- A water bill that climbed while your habits stayed the same
- A water meter whose leak indicator keeps spinning though every tap and appliance is off
- A brown ring on the ceiling, or paint that bubbles and peels
- A musty smell in a cabinet or closet that never airs out
- The sound of running water when nobody is using any
Start to finish
How the job goes
Read the meter
With all the water in the house turned off, the meter shows whether anything is still flowing and roughly how fast.
Divide and narrow
We shut valves one at a time to separate hot from cold and house from yard, until one section of pipe is left.
Show you and price it
We point out the leak's location, explain which part let go, and quote the fix ahead of opening any wall or floor.
Fix it and prove it
The repair goes in, the line goes back under pressure, and we watch the meter again to make sure it sits still.
Around these parts
Leak Detection in North Texas
Homes across North Texas give leaks a few favorite hiding places. Many houses that went up between the last years of the 1970s and the middle of the 1990s were plumbed with gray polybutylene, a plastic pipe whose fittings are known for letting go. Water lines here often run through the attic or an outside wall, so a hard freeze can split a pipe that stays quiet until the thaw. And our hard water leaves scale that wears out shut-off valves and the seals inside faucets and toilets, which is where many slow drips begin.
Fair questions
Plain answers about leak detection
How can I check for a leak before anyone comes out?
Turn off every faucet, the dishwasher, the washing machine and the sprinklers, then look at your water meter, usually in a ground box near the curb. If the leak indicator or the numbers are still moving, water is getting out somewhere. Check the toilets next. Squeeze some food coloring into every toilet tank and leave the handles alone for fifteen minutes or so. A bowl that has picked up the color has a flapper that is worn.
Do you have to tear into my walls to find it?
Not to find it. The testing happens at the meter and the valves, so the search itself is clean. Once the leak is pinned down, we open only the spot needed to reach the pipe, and you know how big that opening will be before we make it.
Will my homeowners insurance pay for a leak?
That depends on your policy, and your insurer has the final word. As a general rule, many policies help with damage from a sudden burst and are less generous about slow leaks or the plumbing repair itself. Take photos before anything is moved, and write down what the plumber tells you about what failed and why. Adjusters usually ask.
