Daily 8 AM–8 PM

Serving Dallas–Fort Worth

Kitchen & Bathroom Plumbing in DFW

The kitchen and the bathrooms hold most of the plumbing in a house. From a disposal that only hums to the pipes behind a new shower, we handle the parts you see and the parts in the wall.

Illustration of the open cabinet under a sink, showing the drain trap, two shut-off valves, a flashlight on a red bandana and an adjustable wrench
  • Price given before work starts
  • Nothing starts until you approve it
  • Repairs tested before we leave
  • Work area left clean

The lowdown

In the kitchen, the work is mostly under the sink: the garbage disposal, the drain trap, the dishwasher connection, the small line that feeds the refrigerator's ice maker, and the shut-off valves that control all of it. A disposal that hums without turning is usually jammed and can often be freed. One that leaks from the bottom of its housing has worn out and needs replacing.

In the bathroom, the important parts hide behind the tile. A shower that runs hot and cold on its own schedule usually needs a new cartridge in the valve. A tub that drains slowly or will not hold water needs attention at the drain and stopper. If you are remodeling, we do the plumbing side: moving drains and supply lines, setting the shower valve and tub, and connecting the fixtures once the tile and counters are in.

Jobs we see most in kitchens and baths

  • A garbage disposal that hums, leaks or has gone silent
  • A drip or a puddle in the cabinet under the sink
  • A shower that swings hot and cold, or a handle that is hard to turn
  • A tub that will not hold water, or drains slower each week
  • A new sink, dishwasher or refrigerator line that needs connecting

Start to finish

How the job goes

  1. See the whole setup

    We look at the fixture, its valves and its drain together, because a problem at one usually involves another.

  2. Talk through the options

    Repair, replace or relocate. You get the price for the path you choose before work begins.

  3. Build it to plumbing code

    Proper traps and venting on drains, new shut-off valves where the old ones are seized, and connections that can be reached later.

  4. Run everything

    Sinks filled and drained, the disposal and dishwasher run, shower valves checked hot and cold, and the cabinet left dry.

Around these parts

Kitchen & Bath in North Texas

Two local facts shape kitchen and bath work in North Texas. First, nearly every house sits on a concrete slab, so moving a toilet, a tub or a kitchen sink drain during a remodel means cutting concrete, and it pays to know that before the layout is final. Second, hard water leaves scale inside shower cartridges and on disposal and dishwasher parts, which shortens their working lives. If your shower handle has grown stiff, scale on the cartridge is the likely cause.

Fair questions

Plain answers about kitchen & bath

My disposal just hums. Is it done for?

Maybe not. Turn off the switch, then look underneath for a hex-shaped socket in the center of the unit. On most models the small wrench that came with the disposal, or a quarter-inch Allen key, fits there. Work it back and forth to free the jam, press the red reset button on the bottom, and try again. Never put a hand inside. If it still only hums, or it drips from the housing, it is time for a new one.

Can you move plumbing for a remodel on a slab foundation?

Yes. Supply lines are simple to reroute through the walls and attic. Drains are the bigger job, because they run under the concrete and need slope to work. Moving one means cutting a trench in the slab, laying new pipe and patching the concrete. We will walk the room with you and say plainly what each change involves.

Will you work alongside my contractor?

We will. The rough-in happens while the walls are open, and the fixtures are set and connected after the finishes are done. Your contractor hears what we need and when. If you are running the project yourself, we work with you directly the same way.